top of page

Mizuno Hyperwarp Elite 2 Review

1 day ago
4 min read

The original Hyperwarp Elite was one of the race shoes I enjoyed most in 2026. I tested it at parkrun to see whether it could help me run my fastest 5K. It did, though the course turned out to be slightly short. I went on to race it over 10K and the half marathon, and it impressed me at every distance. Now the Hyperwarp Elite 2 is here, and I’m testing it the same way. This review covers my first impressions after a 5K. A 10K and a half marathon will follow, and I’ll report back after both.

Specifications
  • Price: £245
  • Stack Height: 39mm heel, 36mm forefoot
  • Drop: 3mm
  • Midsole: Dual-density setup, with Enerzy XP Plus on top and Enerzy XP underneath
  • Plate: New full-length 3D carbon Smooth Speed plate
  • Outsole: G3 rubber
  • Upper: New engineered mesh
  • Weight: 181g (UK 10)
  • Fit: Go up half a size


What’s New
The Hyperwarp Elite 2 has a dual-foam midsole. The top layer is Enerzy XP Plus, a soft supercritical PEBA foam. Below it is Enerzy XP, a supercritical PEBA blended to be denser and more stable. Between them is a new full-length 3D carbon plate. The outsole uses G3 rubber, which I think is brilliant, and the upper is a new engineered mesh.

Up top, the sawtooth laces work well and the lockdown is excellent. Underfoot, the heel gives you a wide, stable landing platform, while the midfoot narrows considerably. The forefoot is where the shoe stands out. It’s noticeably wider and carries more foam than before, and that makes a real difference to the ride. I also really like the colourway.

On sizing, I’ve gone up half a size to a UK 10 (US 11), and it fits me perfectly. I’d recommend doing the same with Mizuno’s race-day shoes.

The New Hyperwarp Lineup
Mizuno has restructured the range. The Elite now sits at the top alongside the Hyperwarp Pure. The Pure uses the same plate but only Enerzy XP Plus foam, so it’s softer, with a slightly different stack height. Below them is the Racer, which appears to replace the Pro. Then there’s a new shoe called the Pacer, a training shoe designed to work alongside the rest of the family. I’m hoping to test the whole lineup, and the Pacer especially interests me ahead of my next marathon block.

It’s also worth mentioning that the original Hyperwarp Pro is a good buy if you can find it heavily discounted, particularly if you want a racing shoe with a touch of stability.


Performance
So far I’ve run in the Elite 2 three times, including a short tempo session, but the real test was parkrun. I took the shoe to Bushy Park, the home of parkrun, and left the camera at home so I could focus on running hard. I finished in around 19 minutes 40 seconds. That’s an effort comparable to sub-40 10K pace, and a time I’m very pleased with.

If you haven’t run Bushy Park, I’d thoroughly recommend it, but choose your super shoes carefully. Much of the course runs through parkland rather than on tarmac. I ran on a frosty, cold morning, and on a wet day many race shoes would have you sliding around. The Elite 2’s outsole handled the conditions brilliantly. Running under 20 minutes on that surface says a lot about the shoe’s grip and stability.

The forefoot is the highlight. The extra width and foam under the ball of the foot, working with the carbon plate, make it a real pleasure to get up on your toes and push. Enerzy XP Plus and Enerzy XP blend together very well, and the shoe doesn’t feel like it has 39mm of stack. It felt lighter and lower than the numbers suggest.

My pace felt consistent and strong, with a quick turnover. The bouncy forefoot gave me the confidence to push on and hold sub-20 pace. Some race shoes can feel rough and ready, but this one is exceptionally smooth. I also noticed during the tempo session that it stayed stable at warm-up paces of eight and a half to nine minutes per mile, which isn’t always the case with super shoes.

It’s lightweight, responsive and grippy, with excellent breathability and lockdown. Version one also did all of this well, but the extra forefoot foam on version two has improved the ride further.


Where It Fits
The 5K test was passed easily. My early impression, though, is that the Hyperwarp Elite 2 is set up best for the half marathon. It feels fast, light and smooth, and its stack sits in a sweet spot for that distance. It could work for a marathon, but I’d want to be running well to make the most of it over 26.2 miles. My next test is a 10K on 6th December, followed by a half marathon, and I’ll share my verdict after both races.

Conclusion
The Mizuno Hyperwarp Elite 2 builds on an already excellent first version. The dual-foam midsole is well balanced, the wider forefoot makes the ride more confident and more fun, and the outsole gives you grip and stability you can rely on in difficult conditions. At £245 it’s a premium race shoe, but on this first impression it does everything you’d want: it holds a fast pace without feeling like you’re working harder than you need to. The 10K and half marathon will tell us more, but I have high hopes for this shoe in 2027.



© FORDY RUNS

EMAIL: HELLO@FORDYRUNS.COM

UNITED KINGDOM

FORDYRUNS.COM

  • Facebook Social Icon
  • YouTube Social  Icon
  • Instagram Social Icon

Privacy Policy

Contact Us

About

Terms of Service

Amazon Affiliate

Shop

bottom of page